Paper press tool is precision punched mould of 2 × 4 mm with a precision of 0.01 mm in size for specialty paper for electronic companies, 15mm paper width, roll length. Paper is tough, one side is coated with glue to increase toughness.
Detailed description of paper press tool:
Press tool materials:
The center of the paper press tool is the pestle and mortar of the press tool, which is directly involved in the cutting process, both of which are medium, hard and durable. The molding material used is Japan's SKD 11.
Design of paper press tool: The mould consists of three main parts.
- The heart of this paper press tool is still a pestle and mortar. Pitches and mortars are machined with high precision so that they can be assembled together to ensure that the mortar gap is 0.005 mm or less. Baseball and mortar are smoothed so that the cutting edge is sharp enough to ensure that no cutting occurs.
- The second part is the outer details involved in setting the price, correctly positioning the pestle. These details are usually made of S50C material, which will be lightened after machining to increase the aesthetics of the stamping press and ensure that the stamping die is not rusted, affecting the quality of the product.
- The last part is the cylinder system that creates the movement of the punching pile up and down the paper.
Evaluation of paper press tool:
The details of the paper press tool after machining will be assembled together and tested for testing. Piercing process about 100 times to check the size of the product after the chisel and see if there is no after punching. If the product size is ok, no bavia, the press die will be packed and shipped to the customer.
