Product code: IMI 1.2.4
Producer:
  • Single press tool is the type of precision moulds used to punch out a series of mechanical components used in the manufacture of motorcycles.Each time the press will generate a product with a deformation of the punch. The product is SPCC sheet thickness 5mm.

    * Single press tool consists of three main parts:

    • The first part is the upper mold including the embryo, pestle, base, baseball cushion, upper cutting board and base. The most important of these is piston stamping, made of SKD 11 Japan, with a hardness of 58 hrs and a sharpened trowel. Baseball and cushion are made of S50c heat treating hardness 45-50 Hrc. The details are linked together by the navigation pin.
    • The second mold, like the upper mold, is the most important component of the lower die as the mortar with the material is SKD 11 and the hardness after thermal treatment is 58 hrc. Mortice cushions, usually made of S50c material with a hardness of 45-50 hrc. Often the molds are usually made up of hook hooks to facilitate the transport, installation and testing of the mold because of the heavy mold.
    • The third part involved in the die set is standard components such as guide shafts, push pins, springs. Most of the above details are standardized and are available for purchase by well known makers such as Misumi.

    Same product

    Single press tool is the type of precision moulds used to punch out a series of mechanical components used in the manufacture of motorcycles.Each time
    Paper press tool is precision punched mould of 2 × 4 mm with a precision of 0.01 mm in size for specialty paper for electronic companies, 15mm paper w
    Rubber mould is used to mold rubber products used in industry or for civil products. The products are very rich and diverse but include such as rubber

    SELLING PRODUCTS

    The bucket loader (also known as the bucket conveyor )

    BCM IMI manufactures and assembles the largest and most reputable roller conveyors in Vietnam.