Utility inox flanges:
Inox flanges are often used to connect the parts together by bolting or welding. Normally, the flanges will be welded to the connecting piece, then the two wires will be connected to each other through the bolt. In order to reduce the cost of machining, the flange and the parts to be welded and then welded together will be machined.
Flanges are usually made separately and then welded to the welded parts to reduce machining costs while still ensuring assembly requirements.
|| inox 304,
||130 và 160mm
Due to the large diameter, single row so buy relatively hard materials and high cost. All two types of flange are cut from solid stainless steel with a diameter of 130 and 160mm. In fact, sawing workmanship without the use of special saws, can not be saw and can not use lathe to cut the embryo due to the size of the embryo is quite large. The machining of the flange is relatively simple, the workpiece after being blended will be turning and milling to size, it is important to bond and moderate accuracy to assure assembly.